Hi there i am new in corel, i have designed my header which i want to put into dreamweaver, but the problem is when i set the size in corel lets say 760pixels by 350pixels, when i export it to jpeg and then into dreamweaver the size would be different, so how can i set my header size in corel so that when i export it to dreamweaver the size will remain the same
I suspect some procedural issue in sizing the header! If you indeed size the header to 760 x 350 pixels, that size will be the same in any program! Is your page set to work in pixels and is it indeed 760 x 350 pixels? How did you size your header?
I am just now starting to read and study dreamweaver. So I am by no means an expert on this, but I am going to take a stab at it.
If you are inserting your header into the header Div tag, look and see if you have padding and spacing set to other than 0.
It sounds to me like it may be a resolution setting that is set incorrectly, if you just change the page size in the property bar manually it won't export correctly because the default dpi setting is 300dpi.
I'm not sure if your problem is simply that you're going to FILE > EXPORT (as jpeg) or if you're using FILE>EXPORT FOR WEB but you may want to try my example below to see what the working resolution of your document is and if its 300dpi to switch it to 96dpi (the maximum screen resolution displayed by monitors on windows machines is 96dpi) this should fix your problem if i understood it correctly.
Once you've set the page size go to TOOLS > OPTIONS
You can set your dimensions in the property bar or in the below settings. Now when you go to export the file it will export it at the pixel dimension you've specified and at 96dpi.
If this doesn't work maybe you can be a little more thorough explaining the problem so that you get better suggestions...Good Luck!
dreamwizard: It sounds to me like it may be a resolution setting that is set incorrectly, if you just change the page size in the property bar manually it won't export correctly because the default dpi setting is 300dpi.
Hey Alfred,
I agree with you the it shouldn't have anything to do with dpi however it does, if you create a new file based on standard letter size 8.5"x11", then in the property bar change the units to pixels and the dimensions manually to 800px x 500px (just for example) and now if you go FILE> PUBLISH TO WEB you'll see that it generates a really small image rather than the actual pixel size. A bug? i thought so. But its been there for a few versions to the point that i started to think that maybe it was me that was missing something. On the other hand if you follow the above steps then change the dpi to 96dpi though the options, then you go to FILE>PUBLISH TO WEB you'll soon see that this method will give you the exact size desired as you've mentioned. I don't know why it does this but it does. If its a bug, i hope corel corrects it or at least explain the logic that causes this.
I just tested what you are saying and there is defenitely something strange, I will have to test some more! I'll be ack :)
Yes Dreamwizard you are correct it does export the way you describe if you use "Export to Web", however looking at the scenario, the exported size is correct and there is no bug. Let me explain, the issue starts by having to convert the linear page size to pixels, the only way to do that is to use the PPI setting of the page, so if it is set to 300 PPi then you will get the wrong measurement when you export. If you export the image alone by using the "Export" function the image will be the correct size in pixel x pixel since there has to be no conversion from a linear measurement like PPI.
So the simple conclusion is, YES the page PPI has to be changed to 72 or respectively 96 PPI, to export correctly. The other thing would be to set the size of the page to the correct pixel amount after changing the dimensions to pixels.
I finally came to this realization on my own but thank you for taking the time to explain it.
You are a darling thanks for 96 dpi resolution solution :D
Ok I have a simular problem I will just post and ask it here if it gets answered. It is me but don't know how to fix it. I made a page in x4 that was 20" wide because I could not get it wider. So what I did was exported it as a jpg and went to photobucket and uploaded it then set it in my ebay page as html. Now the 20"x50" page I made was small I had large text like 36dpi and I cannot hardly see it. Please tell me what I did wrong.
Jerry Little:I made a page in x4 that was 20" wide because I could not get it wider.
ermmm... CorelDRAW can handle much wider widths than that. But this won't solve your problem.
Jerry Little:Now the 20"x50" page I made was small I had large text like 36dpi and I cannot hardly see it. Please tell me what I did wrong.
Oh dear. You are missing a lot of fundamental info about digital images. That's OK, we were all there once. :-)
First. Here's my approach. If the goal is to make an image for a webpage;
1. Forget measurements in Draw.
2. proportions are important. Choose landscape 8.5" x 11" for now.
3. one idea: Double-click rectangle tool to make rectangle the size of page. Fill it with a color, delete it's outline. Then your export will include this entire shape. Lay out your art the way you like, above this shape.
4. press CTRl+E, Export as JPG with these parameters for starters.
Jeff Harrison, Featured Instructor
CorelDRAW Unleashed Boot Camp Cruise
more parameters for next screen...
result...
BUT note: what you see here is 600 pixels wide instead of 800. Since this forum you are reading prefers 600 as max for pixel width.
so if I put more than 600 pixels wide because I did not know that was max would it not automatically adjust? I went through all this and changed these pixels when exporting. Every size I tried came out the same small.